Icom IC-910H Programming Manual page 10

To Make a call
Press PTT to send the tone. The TX PTT ID will flash continuously on the RX radio(s).
RX Radio:
Memory Ch
Field
5Tone Signaling » Form
5Tone Signaling » RX C.No
RX Code CH (under 5 Tone)
Field
Line 1 » RX Code
Line 1 » ID Dec
RX Code Setting (under 5 Tone)
Field
Timer » Compare Digit
8
Setting / Description
Set to EIA
st
Set to 1. Points to 1
is where the RX radio sees the TX Radio's ID.
Setting / Description
Enter ++++9. The +'s are wildcards, allowing the radio to
see any first 4 digits. The "9" is the qualifier (0-8 will work
also). This last digit must match the same last digit of the TX
radio ID.
Set to ON. This allows the radio to show the TX radio ID.
Setting / Description
Enter the digits you want displayed. For example: Send
98769, but if you only want 9876 to show on this radio's
display, enter 1234. Now the first 4 digits of any 5 tone ID
will be displayed.
line in the RX Code CH window: This
© June 2011 Icom America