Five-Tone Program Settings; 5Tone Rx Code Ch Window - Icom IC-910H Programming Manual

Five-Tone Program Settings

This section defines all of the default 5-tone settings for your radio. In most cases, the default settings will work
best.

5Tone RX Code CH Window

Field
RX Code
Text
ID Dec
Bell
Emer Cancel
ABC (Answer Back
Call)
Ringer
Auto TX
Aud
Stun
Scan
© June 2011 Icom America
Description
Up to a 7 digit 5 tone code can be programmed. The radio will
try to match any received 5 tone code to the value in this field.
This value is displayed when a code matching the
corresponding RX Code field is received.
When turned ON, this will display the matching received RX
Code instead of the value in the Text field.
This field controls how the bell icon appears on the display when
a matching RX Code is received. Options are on, off, or blinking.
If set to ON, a radio user can send an emergency cancel signal
to another radio that is in an emergency repeat state.
Determines how a radio responds when it receives a signal from
another radio. This can be used as a Call Alert.
Determines the type of ring pattern that is sounded once a
matching RX Code is received.
When set to ON, the radio will automatically transmit when the
matching RX Code is received. The transmit time period is
controlled by the Auto Tx Timer in the Common Screen.
Sets the mute condition when a matching RX Code is received.
This setting will stun or kill a radio when the matching RX Code
is received.
Starts or cancels Scan upon reception of matching RX code.
19