Requirements Of The Installation Location; Electrical Connection - bianco puro Instruction Manual

Requirements of the Installation Location

Take care that the device cannot fall over.
Do not place a cloth under the device.
Choose the installation location so that children cannot play with the device or reach into it and cannot pull the power
cord of the device.
Place the unit only inside and do not operate it outdoors.

Electrical Connection

For the safe and faultless operation of the device, the following points for the electrical connection must be observed:
Before connecting, compare the technical data of the device, voltage and frequency 220 - 240 Volts, 50 - 60 Hz, with your
power supply. This data must conform so that the BIANCO puro is not damaged. In case of doubt ask your electrician.
The electrical safety can only be ensured, if it is connected to a properly installed protective earth system.
The manufacturer takes no responsibility for damages caused by a missing or disconnected protective earth.
Make sure that the power cable is undamaged and does not pass over hot surfaces or sharp edges.
The power cable must not be pulled tight or under tension.
Make sure that the power plug is properly inserted into the power socket, a loose plug can lead to overheating of the
device or electric shock.
EN
10