Plastic Installation Template For Ed5000 Exit Devices - Assa Abloy Corbin Russwin ED5400 (A) Series Installation Instructions Manual

Surface Vertical Rod
Exit Devices
Installation Instructions
4

Plastic Installation Template for ED5000 Exit Devices

For use in conjunction with instruction sheets and door marker templates packed with exit device. Holes
and slots are identified below by exit device series and trim. Prep door and frame for only those features
required for the exit device being installed.
Frame
Door Stop
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2013, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Door
Template
Concealed vertical rod
Against frame stop
or mullion (when
applicable). For reim and
SecureBolt exit devices
All ED5000 exit devices
Rim and
®
SecureBolt
Mortise
®
All ED5000 exit devices
Vertical reference
Figure 20
Vertical
reference
Trim only
Against door
surface
Trim only
Trim only
12
Horizontal
reference
FM164 09/19