Installation Instruction - Whirlpool PACW9COL Instructions For Use Manual

Installation instruction

Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions provided
with any tools listed here.
1. Tools needed
• Phillips screwdriver
• Saw
• Cordless drill and 1/8" bit
• Scissors
• Pencil
2. Parts Supplied
The company provides only one plan to install local air
conditioner. See "Install local Air Conditioner".
Location Requirements
NOTES:
• The flexible exhaust hose allows placement of the air
conditioner between 23 1/2" and 67" (60 cm and 170
cm) from window or door.
The appliance with supplementary heater needs
to keep a minimum distance of 100 cm from the
combustible surfaces.
• Local air conditioners are designed as supplemental
cooling to local areas within a room.
• To ensure proper ventilation, keep the required
distance from the return air outlet to the wall or other
obstacles at least 23 1/2" (60 cm).
• Do not block air outlet.
• Provide easy access to grounded outlet.
Electrical Requirements
• The local air conditioner should be connected to a
220-240V / 50Hz, 20-amp fused grounded outlet.
• The use of a time-delay fuse or time-delay circuit
breaker is recommended.
• All wiring must comply with local and national
electrical regulations and be installed by a qualified
electrician. If you have any questions, contact a
qualified electrician.
Use your power supply cord:
Plug power supply cord into a grounded outlet.
NOTES:
• A damaged power supply cord must be replaced with
a new power supply cord obtained from the product
manufacturer and must not be repaired.
For detail installation information, please download from: docs.whirlpool.eu
A. Flexible exhaust hose
B. Window exhaust adapter
C. Outer slider section
D. Rain Cover
E. Inner slider section
Vertical
Silde Window
combustible surfaces
Horizontal
Silde Window
combustible surfaces
- 9 -