PLC Electronic Solutions Veracity Control Wheels Operation Manual page 26

7. Go back to Page 1/4 of the "TRAINER" Menu and note that changing between Switch E positions causes "OFF"
or "ON" to display top left corner.
8. Double tap the "LNK" (Linkage) button twice and from the "LINKAGE MENU" go to "FUNCTION" and tap "RTN".
a. Tap the "S1" button once to go to Page 2/4.
b. Select "GYRO" AND tap "RTN".
i. Tap S1 to get to Page 3/3 of the "FUNCTION" Menu and select "AUXILIARY5". Tap "RTN" to
confirm and set.
ii. In the "AUX5" row, set the "CTRL" from "- -" to "SB" (Switch B).
c. Select "PIT" (Pitch) and tap "RTN"
i. Tap S1 to get to Page 2/3 of the "FUNCTION" Menu and select "AUXILIARY6". Tap "RTN" to
confirm and set.
ii. In the "AUX6" row, set the "CTRL" from "- -" to "SC" (Switch C).
Copyright © 2017
Page 26
PLC Electronic Solutions Ltd.
www.plcelectronicsolutions.com