PLC Electronic Solutions Veracity Control Wheels Operation Manual page 25

c. Tap the "S1" button 3 times to get to Page "4/4".
d. Set "ACT" (Activate) to "ACT" (select and scroll counter-clockwise). "ACT" will now say "OFF".
e. Select "SW" (Switch) and set to "SE" (Switch E). "SE" will flash, tap "RTN" again to go to the "ON/OFF"
Menu.
5. Set the SE/Switch E positions to "OFF, ON, ON" with "ALTERNATE" set to "OFF"
a. Note that changing between positions for Switch E will cause the arrow to point to corresponding
ON/OFF position on the display.
b. Place Switch E / SE in OFF position.
6. Back in Page 4/4 of the "TRAINER" Menu, Ensure that "CH MODE" is set to "8CH".
PLC Electronic Solutions Ltd.
www.plcelectronicsolutions.com
Copyright © 2017
Page 25