Table of Contents
Advertisement
9.4.
Electrical Adjustment Procedures
9.4.1.
Initial guideline
The table below shows which adjustments are necessary according to the unit parts and individual parts to be replaced.
Make sure to perform these adjustments shown below as necessary.
9.4.2.
Set-up manual for DVD Video Camera.
1. Installation of USB Driver
The USB Driver is available at "Software download" on the "Support Information from NWBG/VDBG-PAVC" web-site in "TSN
System".
2. Set-Up
a. Remove the card and disc from this unit.
b. An exclusive jig and PC (including software for adjustment "Tatsujin") are necessary for electric adjustment.
c. Connect main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "SUpport Information from NWBG/VDBG-PAVC" web-
site in "TSN System".
d. Connect the PC and DVD Video Camera as shown in Fig. E1 and E2.
31
VDR-D50P
Advertisement
Table of Contents
