Table of Contents
Advertisement
9.4.3.
Set up of PC-EVR Adjustment
Program
1. Turn on the PC and install the TATSUJIN Adjustment
Program into the PC.
2. TATSUJIN PC-Adjustment Program start in the following
procedure.
PC Menu : [Start] ® [Program] ® [win Tatsujin] ® [DV
Movie] ® [VDR-D50 Series]
Fig. E3-1
3. Select the appropriate model.
4. Turn on the camcorder and set to PC connection (COM)
mode. Then click "Start".
Fig. E3-2
5. When the communication is complete, the dialog will
appear.
Click "Yes" and "Save" to save the EEPROM data.
Fig. E3-3
6. When EEPROM data has been saved, the menu will
appear.
To perform each adjustment, display the adjustment menu
by selecting from "Camera Adjust" or "Video Adjust" and
select each adjustment item.
Note:
The adjusted data is stored in the EEPROM IC after
each adjustment.
7. After adjustment, to close the software, select "Exit" in the
File menu or close the window.
8. To release the PC connection (COM) mode, push the
[DELETE], [RECORDING START/STOP] an [JOYSTICK
CONTROL UP] simultaneously for 3 seconds with the USB
Cable disconnected.
33
Fig. E3-4
Fig. E3-5
VDR-D50P
Advertisement
Table of Contents
