Table of Contents
Advertisement
VDR-D310EG / VDR-D310E / VDR-D310EB / VDR-D310EP / VDR-D310EF
9.3.
Electrical Adjustment Procedures
9.3.1.
Set-up manual for DVD Video Camera.
1. Installation of USB-SERIAL Driver
Execute the "Setup.exe" file in "Com Mass" folder by double clicking to install the USB-SERIAL driver.
2. Set-Up
a. Remove the card and disc from this unit.
b. To enter the PC connection (COM) mode, push the [DELETE] button, [RECORDING START/STOP] button and [JOYSTICK
CONTROL UP] simultaneously for 3 seconds without connecting the USB Cable.
c. Connect the PC and DVD Video Camera as shown in Fig. E1 and E2.
Fig. E1
Fig. E2 Rough image of set-up connection
32
Advertisement
Table of Contents
