SDR-H80P
9.4.
Electrical Adjustment Procedures
9.4.1.
Initial Guideline
The table below shows which adjustments are necessary according to the unit parts and individual parts to be replaced.
Make sure to perform these adjustments shown below as necessary.
9.4.2.
Set-up manual for SD Card/Hard Disk Video Camera.
1. Installation of USB-SERIAL Driver
Execute the "Setup.exe" file in "Com Mass" folder by double clicking to install the USB-SERIAL driver.
2. Set-Up
a. Remove the SD card from this unit.
b. To enter the PC connection (COM) mode, push the [OIS] button, [iA] button and [JOYSTICK CONTROL UP] simultaneously
for 3 seconds without connecting the USB Cable.
38