Replacing a SATA Interposer Card
Figure 39: Replacing Supercap
1
Securing tab
Replacing a SATA Interposer Card
For software-based storage control that uses the server's embedded SATA controller, the server requires a
SATA interposer card that plugs into a horizontal socket on a dedicated mRAID riser (internal riser 3).
Note
You cannot use a hardware RAID controller card and the embedded software RAID controller at the same
time. See
Step 1
Prepare the server for component installation:
Maintaining the Server
70
Embedded SATA RAID Controller
2
Hinged latch
for details about RAID support.
Maintaining the Server