Cisco UCS C220 M5 Maintaining page 33

Maintaining the Server
Figure 17: Removing the CPU/Heatsink Assembly
1
2
3
Step 2 Transfer the CPU socket covers from the new system to the system that you are returning:
a) Remove the socket covers from the replacement system. Grasp the two recessed finger-grip areas marked "REMOVE"
and lift straight up.
Keep a firm grasp on the finger-grip areas at both ends of the cover. Do not make contact with the CPU
Note
socket pins.
Heatsink
Heatsink captive nuts (two on each side)
CPU carrier (below heatsink in this view)
CPU socket on motherboard
4
5 T-30 Torx driver
-
Maintaining the Server
Moving an M5 Generation CPU
33