Cisco UCS C220 M5 Maintaining page 26

Replacing a CPU and Heatsink
Figure 12: Removing the CPU/Heatsink Assembly
1
2
3
Step 2 Separate the heatsink from the CPU assembly (the CPU assembly includes the CPU and the CPU carrier):
a) Place the heatsink with CPU assembly so that it is oriented upside-down as shown below.
Note the thermal-interface material (TIM) breaker location. TIM BREAKER is stamped on the CPU carrier next to
a small slot.
Maintaining the Server
26
Heatsink
Heatsink captive nuts (two on each side)
CPU carrier (below heatsink in this view)
CPU socket on motherboard
4
5 T-30 Torx driver
-
Maintaining the Server