Returning For Servicing; Calibration Interval - R&S RT-ZC20 User Manual

www.allice.de
®
R&S RT-ZC20
Figure 4-1: QR code to the Rohde & Schwarz support page
4.3

Returning for Servicing

Use the original packaging to return your R&S RT-ZC20 to your
Rohde & Schwarz service center. A list of all service centers is available on:
www.services.rohde-schwarz.com
If you cannot use the original packaging, consider the following:
1. Use a sufficiently sized box.
2. Protect the product from damage and moisture (e.g. with bubble wrap).
3. Use some kind of protective material (e.g. crumpled newspaper) to stabilize
the product inside the box.
4. Seal the box with tape.
5. Address the package to your nearest Rohde & Schwarz service center.
4.4

Calibration Interval

The recommended calibration interval for R&S RT-ZC20 current probe is one
year. For servicing, send the probe to your nearest Rohde & Schwarz service
center (see Chapter 4.3, "Returning for
User Manual 1409.7814.02 ─ 03
Allice Messtechnik GmbH
Maintenance and Service
Servicing", on page 24).
Calibration Interval
24