Connecting The Probe To The Oscilloscope - R&S RT-ZC20 User Manual

www.allice.de
®
R&S RT-ZC20
3.2

Connecting the Probe to the Oscilloscope

► Connect the probe box (1) to the Rohde & Schwarz probe interface of the
oscilloscope (2).
The probe snaps in when connected properly to the port.
Figure 3-2: Connecting the probe to the Rohde & Schwarz oscilloscope
► To disconnect the probe:
a) Press and hold the release button (3).
b) Pull the probe box away from the oscilloscope.
User Manual 1409.7814.02 ─ 03
Allice Messtechnik GmbH
Putting into Operation
Connecting the Probe to the Oscilloscope
15