Advertisement
To help prevent water entry, a bead of silicone must be ran around the J-Hooks and Housing rail. This will need to be
1
done on all eight J-Hooks.
Housing Rail
2
A bead of silicone must be ran between housing rail and housing divider. Both sides of divider will need to be siliconed.
Silicone joint both sides
of divider
by TruXedo, Inc.
P.O. Box 1078, 2209 Kellen Gross Dr., Yankton, SD 57078
Phone: 877- 878-9336 • Fax: (605) 664-9304 www.truxedo.com
TRUXEDO® INVIS-A-RACK® SILICONE INSTRUCTIONS
Water Entry Prevention.
Housing Divider
Housing Rail
J-Hook
Housing Rail
Housing Divider
Housing Rail
Bead of Silicone
Fill Gap Between Housing
With Silicone
View from Bottom
Bead of Silicone
P/N 1117844 Rev. A
Advertisement
Need help?
Do you have a question about the Lo Pro QT and is the answer not in the manual?
Questions and answers