Page 1
Owners & Installation Manual Read InstRuctIons - Failure to assemble cover properly will void warranty. Damaged or missing parts? 1-877-878-9336 Call Mon - Fri 8 am - 5 pm CT Parts will be shipped to you factory direct. Do not return kit to place of purchase. Specify length or make and model of vehicle to inquire about headers, cover, side...
Page 2
Place remaining clamps loosely over side Align cover with pickup bed: rails & pickup bed rails: place three clamps on each side rail to keep rails in place Front bulkhead truxport side rail clamp assembly pickup bed rail TruXedo, Inc.
Page 3
Tighten front clamps: Center side rails on pickup bed: 1/8” side rail align grooves in clamp with grooves in side rail install front clamps as close to bulkhead as possible tighten clamp 1/8” 1/8” leave clearance between tailgate header Tighten clamps at tailgate: and side rails fold back header and cover cover not shown...
Page 4
Close cover: pull cover tight across secure loop to hook with tailgate open, press center of tailgate width of pickup bed. fasteners on one side hook tailgate header release safety straps, header down until secure loop and hook rail by pressing edge of into header stops on and unroll cover over both latches engage.
Need help?
Do you have a question about the Truxport and is the answer not in the manual?
Questions and answers