Operation - Johnson Controls tyco TY-B Series Manual

TFP680
Page 2 of 16
NOTICE
The Series TY-B and TY-FRB Sprinklers
described herein must be installed
and maintained in compliance with
this document and with the applicable
standards of the NFPA, in addition to
the standards of any authorities having
jurisdiction. Failure to do so may impair
the performance of these devices.
The owner is responsible for main-
taining their fire protection system
and devices in proper operating con-
dition. Contact the installing contrac-
tor or product manufacturer with any
questions.
Sprinkler
Identification
Number
TY-B Stainless Steel
Standard Response
TY8191 . . . . . . . . . . . Upright 5 .6K, 1/2 in . NPT
TY8291 . . . . . . . . . . .Pendent 5 .6K, 1/2 in . NPT
TY9191 . . . . . . . . . . . Upright 8 .0K, 3/4 in . NPT
TY9291 . . . . . . . . . . .Pendent 8 .0K, 3/4 in . NPT
TY8691 . . . . . . . . . . . . . C/UP 5 .6K, 1/2 in . NPT
TY9691 . . . . . . . . . . . . . C/UP 8 .0K, 3/4 in . NPT
TY8391 . . . . . . . . . . . . . .HSW 5 .6K, 1/2 in . NPT
TY8491 . . . . . . . . . . . . . . VSW 5 .6K, 1/2 in . NPT
TY-FRB Stainless Steel
Quick Response
TY8181 . . . . . . . . . . . Upright 5 .6K, 1/2 in . NPT
TY8281 . . . . . . . . . . .Pendent 5 .6K, 1/2 in . NPT
TY9181 . . . . . . . . . . . Upright 8 .0K, 3/4 in . NPT
TY9281 . . . . . . . . . . .Pendent 8 .0K, 3/4 in . NPT
TY8681 . . . . . . . . . . . . . C/UP 5 .6K, 1/2 in . NPT
TY9681 . . . . . . . . . . . . . C/UP 8 .0K, 3/4 in . NPT
TY8381 . . . . . . . . . . . . . .HSW 5 .6K, 1/2 in . NPT
TY8481 . . . . . . . . . . . . . . VSW 5 .6K, 1/2 in . NPT
TY-B SMO
Standard Response
TY8192 . . . . . . . . . . . Upright 5 .6K, 1/2 in . NPT
TY8292 . . . . . . . . . . .Pendent 5 .6K, 1/2 in . NPT
TY8692 . . . . . . . . . . . . . C/UP 5 .6K, 1/2 in . NPT
TY8392 . . . . . . . . . . . . . .HSW 5 .6K, 1/2 in . NPT
TY8492 . . . . . . . . . . . . . . VSW 5 .6K, 1/2 in . NPT
TY-FRB SMO
Quick Response
TY8182 . . . . . . . . . . . Upright 5 .6K, 1/2 in . NPT
TY8282 . . . . . . . . . . .Pendent 5 .6K, 1/2 in . NPT
TY8682 . . . . . . . . . . . . . C/UP 5 .6K, 1/2 in . NPT
TY8382 . . . . . . . . . . . . . .HSW 5 .6K, 1/2 in . NPT
TY8482 . . . . . . . . . . . . . . VSW 5 .6K, 1/2 in . NPT
TY-B Titanium
Standard Response
TY8193 . . . . . . . . . . . Upright 5 .6K, 1/2 in . NPT
TY8293 . . . . . . . . . . .Pendent 5 .6K, 1/2 in . NPT
TY8693 . . . . . . . . . . . . . C/UP 5 .6K, 1/2 in . NPT
TY8393 . . . . . . . . . . . . . .HSW 5 .6K, 1/2 in . NPT
TY8493 . . . . . . . . . . . . . . VSW 5 .6K, 1/2 in . NPT
TY-FRB Titanium
Quick Response
TY8183 . . . . . . . . . . . Upright 5 .6K, 1/2 in . NPT
TY8283 . . . . . . . . . . .Pendent 5 .6K, 1/2 in . NPT
TY8683 . . . . . . . . . . . . . C/UP 5 .6K, 1/2 in . NPT
TY8383 . . . . . . . . . . . . . .HSW 5 .6K, 1/2 in . NPT
TY8483 . . . . . . . . . . . . . . VSW 5 .6K, 1/2 in . NPT
Technical
Data
Approvals
See Tables A, B, C, and D
Maximum Working Pressure
175 psi (12,1 bar)
Temperature Rating
See Tables A, B, C, and D
Physical Characteristics
• Stainless Steel
The frame is free machining ANC4A
Stainless Steel, per BS 3146 PT
2. The Deflector is Type 316L
(UNS 31603) Stainless Steel per
ASTM A479/479M or BS EN 10088
WN1.4401/4404. The Compression
Screw and Button are Type 316L
(UNS 31603) Stainless Steel per
ASTM A479/479M or BS EN 10088
WN1.4404. The Sealing Assem-
bly consists of a Disc Spring that is
sealed on both its inside and out-
side faces with a TEFLON Gasket.
The Disc Spring is 1/2 Hard Berylli-
um Nickel (UNS NO3360) Gold Plat-
ed per MIL G-45204, Type 3, Class
2. The bulb is glass.
• SMO
The Frame, Compression Screw,
and Button are 254 SMO Duplex
Stainless Steel per UNS S31254.
The Deflector is High Performance
Austenitic Stainless Steel per UNS
S31254 or UNS N08926/N08367.
The Sealing Assembly consists
of a Disc Spring that is sealed on
both its inside and outside faces
with a TEFLON Gasket. The Disc
Spring is 1/2 Hard Beryllium Nickel
(UNS NO3360) Gold Plated per MIL
G-45204, Type 3, Class 2. The bulb
is glass.
• Titanium
The Frame is Titanium, Grade 2 per
UNS R50400. The Deflector is Tita-
nium, Grade 2 per ASTM B265-03.
The Compression Screw is Titani-
um, Grade 5 per ASTM B348-03.
The Button is Titanium, Grade 2 per
ASTM B348. The Sealing Assem-
bly consists of a Disc Spring that is
sealed on both its inside and out-
side faces with a TEFLON Gasket.
The Disc Spring is Titanium 6AL/4V
Ti per AMS4911J. The bulb is glass.

Operation

The glass bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass bulb, allowing the sprinkler to
activate and water to flow.
Design
Criteria
The TYCO Series TY-B and TY-FRB
Sprinklers are intended for fire protec-
tion systems designed in accordance
with the standard installation rules
recognized by the applicable Listing
or Approval agency, for example, UL
Listing is based on the requirements
of NFPA 13. Only the Style 10 or 40
Recessed Escutcheon, as applicable,
is to be used for recessed installation.
The Series TY-B and TY-FRB Conven-
tional Sprinklers in pendent orientation
and Vertical Sidewall Sprinklers are for
non-recessed applications only.