Related Manuals for Shure A710-HOUSING Series
Summary of Contents for Shure A710-HOUSING Series
- Page 1 A710-HOUSING Mechanical Housing for MXA710 User guide for the MXA710 housing accessory, which is an empty MXA710 mechanical housing for design purposes. Version: 3 (2020-E)
- Page 2 Shure Incorporated Table of Contents A710-Housing (2-foot or 4-foot) A710-HOUSINGMechanical Housing for MXA710 Installing the Wall-Mounting Bracket IMPORTANT SAFETY INSTRUCTIONS Suspending the Microphone from the Ceiling...
-
Page 3: Important Safety Instructions
Shure Incorporated A710-HOUSING Mechanical Housing for MXA710 IMPORTANT SAFETY INSTRUCTIONS READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. -
Page 4: A710-Housing (2-Foot Or 4-Foot)
Shure Incorporated This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accom panying this unit. A710-Housing (2-foot or 4-foot) The A710-Housing is an empty mechanical housing that looks like a real MXA710 microphone. - Page 5 Shure Incorporated To get started, you will need: • Wall-mounting bracket • Cover plate (US or UK) and screws (if using) • 4 drywall anchors and screws • Screwdriver • Drill If you're mounting over a junction box, remove the existing cover plate.
-
Page 6: Suspending The Microphone From The Ceiling
Shure Incorporated Suspending the Microphone from the Ceiling To get started, you will need: • 2 mounting eyelet screws • 2 washers • Braided metal cable or high-strength wire* • Hardware to attach cable to ceiling* Place the washers over the microphone's mounting holes and attach the eyelet screws to the microphone. - Page 7 Shure Incorporated * Not included...