Advertisement
To get started, you will need:
•
Wall-mounting bracket
•
Cover plate (US or UK) and screws (if using)
•
4 drywall anchors and screws
•
Screwdriver
•
Drill
1.
If you're mounting over a junction box, remove the existing cover plate.
2.
Position the wall-mounting bracket. You can mount it vertically or horizontally on the wall.
3.
Using a pencil, mark the wall for the position of the drywall anchors and screws. If you're installing over a junction box,
balance the bracket with 2 screws above the box and 2 screws below it.
4.
Remove the bracket and drill the holes for the drywall anchors. Install the drywall anchors.
5.
Place the bracket on the wall and insert the drywall screws into the anchors to secure the bracket.
6.
If you're mounting over a junction box, reinstall the cover plate over the bracket.
7.
Align the holes on the back of the microphone housing with the raised posts on the bracket and slide the microphone
housing into the bracket until it clicks into place.
8.
To remove the microphone housing, press the tab at the top of the bracket with a screwdriver or other tool and slide the
microphone housing up.
Other mounting options:
Shure Incorporated
5/7
Advertisement
