Shure UA505-RSMA Manual

General
The Shure UA505-RSMA Remote Antenna Mounting Bracket Kit lets you
mount an antenna away from the receiver or equipment rack.
Included Components
Reverse SMA Bulkhead Adapters, lockwasher, nut (1)
Remote Antenna Mounting Bracket Kit (1)
6" Reverse SMA Cable
Remote Antenna Placement
Follow these guidelines when mounting antennas remotely:
• Reduce distance between transmitter and antenna.
• Mount antennas farther from each other to improve performance.
• Position antennas so there is nothing obstructing the line of sight to the
transmitter, including the audience.
• Keep antennas away from metal objects and any other antennas.
Mounting the Bracket
Avoid mounting antennas near Wi-fi access points or other 2.4 GHz devices when possible.
©2016 Shure Incorporated
NOTE: Antennas and bracket mounting hardware (screws, washers and
nuts) are not included in this kit.
Wall bracket dimensions: 84.52 x 63.5 x 77.02 mm (H x W x D)
95A32436
UA505-RSMA
95F31216
• Use only low-loss reverse SMA cable to avoid poor RF signal.
⁃
• Use one continuous length of cable from the antenna to the receiver to
increase signal reliability.
• Always perform a walk-around test to verify coverage before using a
wireless system during a speech or performance. Experiment with anten-
na placement to find the optimum location. If necessary, mark any trouble
spots and ask presenters or performers to avoid those areas.
Wall Mount
Remote Antenna Mounting Bracket Kit
Consult cable's specifications and calculate signal loss for desired
cable run.
UA505-RSMA
1/2