Table of Contents
Advertisement
The safe use of this product requires an understanding of the information on the product and on the
operating manual as well as knowledge of the project you are attempting. Before starting the project,
familiarise yourself with all operating features and safety rules of this petrol ground drill.
Air box
The air box cover houses the air filter which helps to limit the amount of dirt and dust drawn into the
unit during operation.
Choke lever
The choke lever is used when starting the engine.
Driveshaft
The driveshaft is connected to attachments to transfer movement.
Engine switch
The engine switch is used in combination with the recoil starter grip to start the engine. It is also used
to turn the engine off.
Gearbox
The gearbox transfers the engines rpm to a slower high torque output.
Gudgeon pin locator hole
The gudgeon pins secure the attachments to the driveshaft via the locator holes.
Primer bulb
The primer bulb is used to prime the carburettor prior to cold starting or if the unit has not been used
for a while.
Recoil starter grip
The recoil starter grip is used (along with the engine switch) to start the engine.
Throttle lock
The throttle lock is used to help the engine on cold starts.
Throttle trigger
The throttle trigger helps the operator control the speed of the auger to suit various ground conditions.
Trigger lock
The trigger lock prevents the operator from accidentally activating the throttle trigger. The trigger lock
must be depressed before applying the throttle.
© by WilTec Wildanger Technik GmbH
Item 61197
Page 9
http://www.WilTec.de
http://www.aoyue.eu
11 2020-1
http://www.teichtip.de
Advertisement
Table of Contents
