Table of Contents
Advertisement
Setting the idle speed
If the screw device is turning while being in idle state, the idling speed must be adjusted using the
screw on the motor. Turn the idle screw counter-clockwise to reduce the idle speed and stop the auger
from moving. If the auger attachment is still turning, contact a qualified person to adjust and discon-
tinue use until the repair is complete.
L: Idle screw
Remove all foreign matter from the device. Store the device when not in use indoors and in a dry, well-
ventilated area inaccessible to children. Keep away from corrosive agents such as garden chemicals.
Follow all ISO and all local regulations for the safe storage and handling of gasoline.
When stored for more than a month
Drain all fuel from the tank into a gasoline-approved container. Let the engine run until it stops.
© by WilTec Wildanger Technik GmbH
Item 61197
Page 19
http://www.WilTec.de
http://www.aoyue.eu
11 2020-1
http://www.teichtip.de
Advertisement
Table of Contents
