Table of Contents
Advertisement
Symbols and their meaning
Important! Some of the following symbols may be used on the tool. Study them and understand their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
Symbol
Safety symbol
Read your operators manual
Eye and hearing protection
Keep bystanders away
Boots
Gloves
No smoking
Petrol
Oil
Mix petrol and oil
Switch
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Explanation
Indicates danger, warning or caution. It means attention! Your safety is
involved!
Your manual contains special message to bring attention to potential
safety concerns as well as operating and serving information. Please
read all information carefully to ensure safe use.
Wear eye and hearing protection when operating this equipment.
Keep all bystanders at least 3 m away.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling the fuel tank.
Use unleaded petrol intended for motor vehicle use with an octane rating
of 90 ([R+M]/2) or higher
Use a synthetic two-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
On/off switch
I = on (to run)
O = off (to stop)
Item 61197
Page 6
11 2020-1
Advertisement
Table of Contents
