Table of Contents
Advertisement
Maintenance
Servicing requires extreme care and knowledge and should be performed only by a qualified service
technician. For servicing and repair bring the product to your nearest qualified technician.
Technical specifications
Dimensions
Weight empty
Application / information / equipment
Motor design
Ignition
Maximum motor power
Tank capacity
Compatible drill attachment
Assembly
Unpacking
Carefully remove the tool and any accessories from the box. Make sure that all items listed in
•
the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
•
Do not discard the packing material until you have carefully inspected and satisfactorily oper-
•
ated the tool.
Warning!
If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to
do so could result in possible serious injury.
Warning!
Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such action or modification is misuse and could result in a hazardous condition lead -
ing to possible serious personal injury.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
530 × 370 × 320 mm
Shaft: 58 mm × Ø 20 mm
9,5 kg
Fuel-oil mix ratio: 1:50
Transfer ratio: 40:1
Air cooled two-stroke one-cylinder
fuel motor
Magneto transistor ignition CDI
1,4 kW / 6500 rpm / 1,9 PS
52 ccm
0,98 ℓ
⌀ 00–300 mm
1
Item 61197
Page 7
11 2020-1
Advertisement
Table of Contents
