Table of Contents
Advertisement
Fitting the auger bits
Align the engine drive shaft into the seat on the auger bit and secure it using the appropriate gudgeon
pin and cotter pin.
Note! Do not start digging a hole without the auger bit attached.
CAUTION!
Never use the drill with the handles above waist level. Drilling with the unit handles above
waist level restricts control and can cause serious chest injuries if a hard object is struck.
CAUTION!
Do not change the ratio of the reduction gearbox. The characteristics of the machine could
change and unforeseen reactions could occur.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61197
Page 10
11 2020-1
Advertisement
Table of Contents
