Warnings And Important Notices - Car-O-Liner D20 Instruction Manual

Car-O-Liner AB
2.2

Warnings and important notices

2.2
The following types of safety signs are used on the draw aligner and in the
instruction manual:
Command (blue with white symbol)
Describes a specific responsibility.
Warning! (yellow background, black symbol, black
border). Warns of safety risks.
The following warnings and important notices are used in the instruction
manual:
WARNING! (in bold, italic type) is used in this manual to indicate a
possible danger that could lead to personal injury. An
instruction is normally given, followed by a short explana-
tion plus the possible effect if the instruction is not fol-
lowed.
IMPORTANT! (in bold, italic type) is used in this manual to indicate
practical information. It is also used to indicate a possible
danger that could lead to damage to the draw aligner or
other equipment and/or cause environmental damage.
Note! (in bold, italic type) is used to accentuate supplementary
information that is required for problem-free use or
optimal use of the draw aligner.
In addition to the safety signs illustrated in Section 2.3, the following warn-
ings and important notices appear in the manual:
WARNING! The draw aligner must only be used with a hydraulic cylinder
with a maximum capacity of 5 tons. Risk of injury.
WARNING! Make sure that the stop wire is correctly fitted and undamaged.
Otherwise, the draw aligner arm might hit somebody if the hydraulic cylinder
malfunctions.
WARNING! Make sure that the safety wire is correctly fitted and undam-
aged. Otherwise, the pulling chain might cause injuries if it looses its grip on
the vehicle.
WARNING! Watch out for flying objects during alignment work. Do not
stand behind or near the draw aligner during a pull. Risk of injury.
2 Safety
Speed Draw aligner D20
(138 03 85 231, rev. 0), 2001-04, GB/US