Car-O-Liner D20 Instruction Manual page 29

Speed Draw aligner D20
Unlocked - locking wedge Out
(138 03 85 231, rev. 0), 2001-04, GB/US
It is now safe to use the draw aligner for minor alignment work and it may be
rotated along the circular end of the lifting platform. To lock the draw aligner
at the needed position, proceed as follows:
6 Drive in the locking wedge with a soft headed hammer (e.g. brass or
copper).
Figure 4.11 Locking the draw aligner.
Note! To rotate the draw aligner along the lifting platform, drive out the
locking wedge with a soft headed hammer.
WARNING! Always wear safety glasses when hammering the locking
wedge in or out. Risk of splinters.
WARNING! Make sure that you use a soft headed hammer when hammer-
ing the locking wedge. Risk of splinters.
4 Operation
Locked - locking wedge In
Car-O-Liner AB
4.9