Car-O-Liner AB
4.8
Figure 4.9 Inserting the draw aligner into the lifting platform.
5
Push the draw aligner forward, about 400 mm (16 in), until it stops.
When the draw aligner knob is completely pushed into the rail,
make sure that the console is placed onto the front of the platform.
Also make sure that the locking device in front of the console is
pushed into the rail.
Console
Figure 4.10 Placing the draw aligner console on the lifting platform.
4 Operation
Speed Draw aligner D20
Rail
Locking device
(138 03 85 231, rev. 0), 2001-04, GB/US