Switch Groups - ABB Relion Applications Manual

1MRS758335 B
3.4.4
REU611
Application Manual
OSWGAPC3
IN_1
PHPTOV1_START
IN_2
PHPTOV2_START
IN_3
PHPTOV3_START
IN_4
PHPTUV1_START
IN_5
PHPTUV2_START
IN_6
PHPTUV3_START
IN_7
ROVPTOV1_START
IN_8
ROVPTOV2_START
IN_9
ROVPTOV3_START
IN_10
FRPFRQ1_START
IN_11
FRPFRQ2_START
IN_12
NSPTOV1_START
IN_13
NSPTOV2_START
IN_14
PSPTUV1_START
IN_15
PSPTUV2_START
OSWGAPC7
IN_1
PHPTOV1_OPERATE
IN_2
PHPTOV2_OPERATE
IN_3
PHPTOV3_OPERATE
GUID-ABBA0E88-9D42-4D61-A3E9-DC321BA760B4 V2 EN
Figure 24: Common alarm indication
The signal outputs from the protection relay are connected to give dedicated
information.
• Start of any protection function PO2 (X100:8-9)
• Operation (trip) of overvoltage protection function SO1 (X100:10-12)
TPGAPC functions are timers and they are used for setting the minimum pulse length
for the outputs. There are seven generic timers (TPGAPC1...7) available in the
protection relay.

Switch groups

In configuration A, the switch group function blocks are organized in four groups:
binary inputs, internal signal, GOOSE and binary outputs and LEDs.
REU611 standardized configuration
COMMON ALARM INDICATION 1 & 2
TPGAPC1
IN1 OUT1
OUT
OR
TPGAPC3
OUT
IN1
OUT1
OR
Section 3
SELGAPC3 X100 PO2
IN_4 OUT_2
IN_8 OUT_3
X100 SO1
43