BATEC MINI User Manual page 112

Checking tyre pressure:
Make sure the tyre pressure is
irregularities on the surface.
Cleaning the Batec:
Clean the frame with soap and warm water. Use car soap or another non-abrasive cleaning
agent. Dry it carefully. Never use a pressure washer to clean it.
Important!
Cleaning front and rear wheels:
Make sure the front wheel and rear wheels turn freely and eliminate any dirt.
Tightening screws:
Make sure all the screws and connections are tight. The recommended tightness for the
screws is:
• M5 screws: 5 Nm
• M6 screws: 8 Nm
•
M8 screws: 18 Nm
USER MANUAL
as recommended for each model
Sand and salt water can damage some parts of the Batec after
prolonged contact. Clean it after use in these conditions.
PAGE 112 / 119
NUMBER/VERSION: MU-001/12.0
C/ Illa de Buda, 2 (P.I. Sud-Oest)
08192 Sant Quirze del Vallès [Barcelona - Spain]
www.batec-mobility.com info@batec-mobility.com
and that there are no
APPLICATION DATE: 10/10/19
T +34 935442003