Pro:centric Setup - LG Lodging Guest Interactive Pro: Centric 32LD660H Setup Manual

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be
specified on the TVs.
On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/
administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the
Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric server Admin Client.
The Data Channel and Pro:Centric Application Mode can be set using one of the following methods:
• If the TV is in Pass-through Mode, either:
− Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
Refer to "Installer Menu" information on pages 14 to 22 for further information. Also, as necessary,
refer to "Master TV Setup" information on pages 10 to 13 and/or cloning information on pages 24 to 32.
− Set the Pro:Centric and Data Channel values in the Pro:Centric Menu. See "Access the IP Environment
Menu" on page 45 and "Pro:Centric Setup" on page 46 for further information.
• If the TV is in FTG Mode (via CPU or EBL), use the appropriate software to update the Pro:Centric
and Data Channel Installer Menu items, and then transfer the FTG Installer Menu settings to the TV in
accordance with the FTG Mode of configuration. Refer to FTG Mode information on pages 33 to 44 for
further information.
206-4200
Pro:Centric Operation (Cont.)
9