Usb Cloning Procedures; Learning / Teaching A Master Tv Setup Using A Usb Memory Device / .Tlx File - LG Lodging Guest Interactive Pro: Centric 32LD660H Setup Manual

Commercial mode setup

Hide thumbs Also See for Lodging Guest Interactive Pro: Centric 32LD660H:

Owner's manual (207 pages)

Owner's manual (65 pages)

Owner's manual (76 pages)

Table Of Contents

Table of Contents

Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File

USB Cloning Notes

• Read the IMPORTANT CLONING INFORMATION on page 24 before beginning any cloning procedures.

In particular, ensure that the Master TV Setup does not contain a Channel Map; otherwise, Teaching will

result in the Target TV(s) being configured for FTG Mode via CPU.

• You may edit the filename as part of the Learning procedure; however, a file with edited contents will not

be recognized.

• It is not possible to clone a Master TV's clock using a USB memory device. Either set a Target TV's

clock manually, or use the Auto Clock setting in the TV setup menus.

Learn Setup from Master TV

1. Ensure the Master TV is set up completely and in Pass-through

Mode.

2. Plug the USB memory device into the USB IN port on the Master TV.

3. Press MENU on the Installer Remote to display the TV setup menus.

Use the arrow navigation keys to select/highlight the Option menu

icon, and then press the number "7" key a total of seven times to

display the USB Download Menu.

4. To gain access to the "Learn From TV" option in the USB

Download Menu, key in the password used to access the Installer

Menu (Example: Press 9-8-7-6).

5. Use the Up/Down arrow keys to select Learn From TV (TLX), and

then press ENTER.

6. To differentiate this .tlx file from others, you can use the Up/Down

arrow keys to change the last five digits of the filename. Press

ENTER when you are ready to initiate Learning.

Learning status will be shown on a progress bar in a new window.

When the Learning process is complete, the USB Download menu

will reappear on the screen.

7. When Learning is done, press RETURN on the Installer Remote to

exit the USB Download Menu, and remove the USB memory device

from the Master TV.

206-4200