Accessing The Installer Menu - LG Lodging Guest Interactive Pro: Centric 32LD660H Setup Manual

Installer Menu
Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages
16 and 17 for brief descriptions of Installer Menu items. More detailed descriptions follow the table
listing.

Accessing the Installer Menu

1. Turn ON the TV.
2. Using an Installer Remote, press MENU repeatedly until the
on-screen display of the TV setup menus (if the TV is in
Pass-through Mode) or the Function Menu (if the TV is not in
Pass-through Mode) no longer toggles, and then press the
Installer Menu entry sequence (e.g., 9-8-7-6) + ENTER to
access the Installer Menu.
Note: The default Installer Menu entry sequence is "9876";
however, if Installer Menu item 000 INSTALLER SEQUENCE
has been modified, the entry sequence may be one of three
additional options. See Installer Menu detailed descriptions for
further information.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
Note: If the password (entry sequence) is not entered or registered correctly,
you will see the message "ENTER PASSWORD 0000" at the top of the screen
instead of the Installer Menu header. Once you re-enter the correct password
(e.g., press 9-8-7-6 + ENTER), the Installer Menu will display.
Note: If the TV is not in Pass-through Mode, the Installer Menu is accessible as
read-only.
As part of the Installer Menu header, two 3-character acronyms are displayed to
indicate the TV's current configuration mode. The table below lists all possible
mode identifiers for these TV models.
Acronym Description
CPU-CTV Pass-through Mode with Channel Map in CPU
CPU-FTG FTG Mode via CPU
EBL-FTG FTG Mode via EBL
EBL-LNT LodgeNet PPV Mode
MPI-EXT External MPI Control
MPI-FTG FTG Mode via FTG device
PTC-CTV Pass-through Mode with Channel Map in PTC
14
xxLD66xH PTC INSTALLER MENU
CPU-CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.022 CPU V3.41.00
Typical Installer Menu
206-4200