Master Tv Setup Procedure - LG Lodging Guest Interactive Pro: Centric 32LD660H Setup Manual

Master TV Setup Procedure

1. Set Installer Menu items.
This step provides specific instruction only on the Installer Menu
items that should be set on a Master TV. Refer to pages 14 to 22
for detailed information on all Installer Menu items.
a) Turn ON the TV. Then, use the Installer Remote to
access the PTC Installer Menu (see "Accessing the Installer
Menu" on page 14 for further information).
b) Set Installer Menu item 117 FACT DEFAULT to 001 and press
ENTER on the Installer Remote.
This clears all Installer Menu custom settings, channel lineup,
etc. and restores the factory default settings. The value will
change back to 0 after the PTC has been restored to factory
default condition. This step ensures that the TV Channel
Memory will be the active channel lineup.
c) Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 000.
• CATV: Set to 001 (default).
d) Set any other Installer Menu items that affect your TV pro-
gramming network to the required configuration. For example,
enable/disable Aux inputs, set a Start Channel, etc.
e) After you have adjusted all Installer Menu item settings as
required, press ENTER once on the Installer Remote to save
your changes; then, press ENTER again to exit the menu.
2. Set up TV features.
On-screen setup menus control the features of the TV. Press
MENU on the Installer Remote to access the TV setup menus,
and then set Channel, Picture, Audio, Lock, Time, etc. options to
the desired configurations. See also "Clonable TV Setup Menu
Features" list on previous page.
Note: If you intend to clone the PTC, remember that only one TV
source's clonable setup menu settings will be cloned. Thus, for a
clone programmer, the TV setup menu settings should be applica-
ble to either an analog channel or Aux input, while for a USB
device / .tll file, the TV setup menu settings should be applicable
to the analog or digital channel or Aux input to which the Target
TV will be set during the Teaching process.
Note: If desired and if appropriate depending on the cloning
method you intend to use (see "Cloning Methods" on previous
page), you can run Auto Tuning (see step 3) prior to completing
this step.
206-4200
• HRC: Set to 002.
• IRC: Set to 003.
Master TV Setup (Cont.)
xxLD66xH PTC INSTALLER MENU
CPU-CTV
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.022
Typical Installer Menu
Note: The Installer Menu header will vary
depending on the TV you are setting up.
117 FACT DEFAULT
003 BAND/AFC
Adjust the values for these
Installer Menu items.
CHANNEL
PICTURE
OPTION LOCK INPUT
Use the TV setup menus to set the TV
features to the desired configuration
for the end user.
(Continued on next page)
000
ASIC D279
CPU V3.41.00
000
001
AUDIO TIME
USB
11