ADF Web HD67B19-B2 User Manual page 20

Industrial Electronic Devices
TLS (T L S
RANSPORT AYER ECURITY
This section is used to define the parameters of TLS protocol. The means of the
fields are:
If the field "Enable TLS" is checked, the TLS protocol for secure connection
is enabled;
If the field "Server Authentication" is checked, the authentication of the
Server using TLS is enabled. If enabled, in the field
certificate from the Server is defined;
If the field "Client Authentication" is checked, the authentication of the
Client using TLS is enabled. If enabled:
in the field "Client
o
defined;
in the field "Client
o
in the field "Client Key
o
NTP (N T P
ETWORK IME ROTOCOL
This section is used to define the parameters of NTP protocol. The means of the
fields are:
In the field "Server URL" the URL or the IP Address of the NTP Server is
defined;
In the field "Poll Time
synchronization is defined.
ADFweb.com Srl – IT31010 – Mareno – Treviso
):
"Server
Certificate" the certificate from the Client is
Key" the private key of the Client is defined;
Password" the password for the private key of the Client is defined.
):
(seconds)" the polling time for the time
User Manual OPC UA Client / MQTT
Document code: MN67B19_ENG
Certificate" the
Figure 3g: "Set Communication
Figure 3h: "Set Communication
INFO: www.adfweb.com
Revision 1.000 Page 20 of 35
 TLS" window
 NTP" window
Phone +39.0438.30.91.31