Table of Contents
Advertisement
32 Operation principle and hardware description
Code
Description
K457
FCAN-01 CANopen adapter module
K458
FSCA-01 RS-485 (Modbus/RTU) adapter module
K462
FCNA-01 ControlNet™ adapter module
K469
FECA-01 EtherCat adapter module
K470
FEPL-02 EtherPOWERLINK adapter module
FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
K475
2-port
K480
Ethernet switch for PC tool or control network (for max. 6 inverter units)
K483
Ethernet switch with optical link for PC tool or control network (for max. 6 inverter units)
K490
FEIP-21 Ethernet adapter module for EtherNet/IP™
K491
FMBT-21 Ethernet adapter module for Modbus TCP
K492
FPNO-21 Ethernet adapter module for PROFINET IO
L500
FIO-11 analog I/O extension module
L501
FIO-01 digital I/O extension module
L503
FDCO-01 optical DDCS communication adapter module
L508
FDCO-02 optical DDCS communication adapter module
L509
RDCO-04 optical DDCS communication for BCU-xx (4xTransmitter/Receiver)
L525
FAIO-01 analog I/O extension module
L526
FDIO-01 digital I/O extension module
N8010
IEC 61131-3 application programmability
P913
Special color (RAL Classic)
P966
Special color (other than RAL Classic)
Q951
Emergency stop (category 0) with safety relays, by opening the main breaker/contactor
Q952
Emergency stop (category 1) with safety relays, by opening the main breaker/contactor
Q954
Earth fault monitoring for IT (ungrounded) systems
Q959
Supply transformer breaker disconnect push button (red, wired to terminals) on the door
Q963
Emergency stop (category 0) with safety relays, by activating the Safe torque off function
Q964
Emergency stop (category 1) with safety relays, by activating the Safe torque off function
Emergency stop (configurable for category 0 or 1) with FSO-xx safety functions module, by activating
Q979
the Safe torque off function
Q984
Emergency stop button monitoring
R700
Documentation/manuals in English
￭
Type designation key of the diode supply module
The type designation describes the composition of the module in short. The complete
designation code is divided in subcodes:
•
The first 1...18 digits form the basic code. It describes the basic construction of the unit.
The fields in the basic code are separated by hyphens.
•
The option codes follow the basic code. Each option code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The option codes
are separated by plus signs.
Code
Description
Basic codes
Advertisement
Table of Contents
