Type Designation Keys; Type Designation Key Of The Supply Unit; Basic Code; Option Codes - ABB ACS880-307LC Hardware Manual

30 Operation principle and hardware description

Type designation keys

￭

Type designation key of the supply unit

The type designation describes the composition of the unit in short. The type designation
is visible on the label (sticker) which is attached to the cabinet. The complete designation
code is divided in subcodes:
• The first 1...18 digits form the basic code. It describes the basic construction of the unit.
The fields in the basic code are separated by hyphens.
• The option codes follow the basic code. Each option code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The option codes
are separated by plus signs.

Basic code

Code Description
ACS880 Product series
307LC Default configuration: liquid-cooled cabinet-installed diode supply unit, IP42 (UL Type 1), supply
frequency 50 Hz, control (auxiliary) voltage 230 V AC, half-controlled diode thyristor bridge, IEC
industrial cabinet construction, main switch type: air circuit breaker, degree of protection IP42 (UL
type 1), EMC filter (category 3, 2nd Environment), EN/IEC approved components, speed-controlled
module cooling fans, DC busbar material copper, cable supply conductors, standard wiring material,
power and control cabling through the bottom of the cabinet, ACS-AP-W assistant control panel,
ACS880 diode supply control program, coated circuit boards, lead-through-type cable entries,
multilingual door device label sticker, complete documentation in English in a USB memory stick.
Size
xxxxx Refer to the rating table in the technical data.
Voltage range
7 525...690 V. This is indicated in the type designation label as typical input voltage levels
3~525/600/690 V AC.

Option codes

Code Description
A004 12-pulse supply connection
A012 50 Hz supply frequency
A013 60 Hz supply frequency
A018 Half-controlled diode-thyristor bridge
B054 IP42 (UL Type 1)
B055 IP54 (UL Type 12)
C121 Marine construction
C129 UL Listed (evaluated to both U.S. and Canadian safety requirements)
Marine type approval. Refer to ACS880 +C132 marine type-approved cabinet-built drives supplement
C132
(3AXD50000039629 [English]).
C164 Plinth height 100 mm
C176 Door hinges on left
C179 Plinth height 200 mm
C205 Marine product certification issued by DNV GL
C206 Marine product certification issued by the American Bureau of Shipping (ABS)
C207 Marine product certification issued by Lloyd's Register (LR)