Sharp MX-B557P User Manual page 56

Understanding the printer menus
PDF
Menu item
Scale To Fit
Off*
On
Annotations
Print
Do Not Print*
Print PDF Error
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu item
Print PS Error
Off*
On
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
Off
On*
Wait Timeout
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Source
Resident*
Disk
Flash
All
Font Name
Courier*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Scale the page content to fit the selected paper size.
Specify whether to print annotations in the PDF.
Enable the printing of PDF error.
Description
Print a page that describes the PostScript® error.
Note: When an error occurs, processing of the job stops, the printer
prints an error message, and the rest of the print job is flushed.
Set the minimum stroke width of any job printed in 1200 dpi.
Disable the SysStart file.
Enable the printer to wait for more data before canceling a print job.
Note: When enabled, the factory default setting is 40 seconds.
Description
Choose the source which contains the default font selection.
Notes:
•
Flash and Disk appear only when a flash memory or hard disk is
installed.
•
For Flash and Disk to appear, make sure that they are not read‑ or
write‑protected.
Select a font from the specified font source.
56