Normal And Prohibited Use; Acoustic Levels - Robland SD410 Manual

Normal and prohibited use

The machine was designed to allow the user to perform all normal operations on a planing-
thicknessing machine.
PROHIBITED USES
Insertion cuts on the planer unit i.e. when the workpiece is not worked along its entire length; the use
of other materials than wood.
REMAINING RISKS
Unintentional contact of the hands with the planer arbor..
Kickback of the workpiece.
Tipping over of the workpiece due to insufficiënt support.
Lacerations when handling knives and pieces.
Health by prolonged inhalation of wood dust, mainly of oak, beech and certain exotic woods.
Deafness by prolonged exposure to noise

Acoustic levels

The values given are the emission levels and not necessarily the levels at which the operator can work
safely. Although there is a correlation between the emission values and the level of exposure, it can not
be used reliably to determine whether additional measures should be taken
NOISE INFORMATION
The values given are the emission levels and not necessarily the levels at which the operator can work
safely.
Although there is a correlation between the emission values and the level of exposure, it can not be
used reliably to determine whether additional measures should be taken
Workstation level
continuous
Planing
Thicknessing
The maximum value of 130dB was not exceeded.
DUST MISSION
Measurements according to DIN 933 893 and B. G. requirements for testing of dust emissions from
woodworking machines ( GS -HO - 05 ).
Show the gains obtained that the maximum TRK value of 2mg / m was not exceeded. See the local
regulations on occupational safety.
SD410 - S410 V0114
accoust. pressure
Level accoust. force
according
index A dB (A )
92
83
Deutsch
Max. accoust value.
Momentary pressure
dB ( A) ( MW )
according to index C
98 (6,3)
97 (5)
English Français
< 130
< 130
43
Nederlands