Important Advice When Ordering Spare Parts; Safety And Maintenance Instructions - Robland SD410 Manual

Important advice when ordering spare
parts
Always mention :
- type of machine
- The number of the issue of the instruction manual
- The part number and quantity
- Your order reference and correct delivery address
FOR YOUR OWN SAFETY AND LIFETIME OF THE MACHINE :
USE ONLY ORIGINAL ROBLAND PARTS.

Safety and maintenance instructions

Attention: Working with woodworking machines can be extremely dangerous if the safety instructions
are not followed. The machine can only be used with the safety equipment installed on your machine
However, the operation of the machine requires constant attention and care.
Therefore, for your own safety, pay attention to the instructions summarised in this chapter.
This machine can only be used if the user complies with the safety instructions.
Carefully read the instructions on how the machine works and what its limitations are.
Ensure that all necessary protections are fitted to the machine, and that the machine is connected to a
dust extraction system.
Allow sufficient space around the machine and a good lighting of the workshop.
Always use a dust mask and a custom hearing protection when working with the machine.
Never remove chips or wood residues by hand with the engine running. Just do it with the machine
switched off.
When changing tools or when doing a maintenance job, the machine must always be disconnected
from its power supply. Tools in poor condition do not only reduce the quality of the work delivered, but
also increase the risk of accidents.
Always wear suitable clothing. Loose or torn clothes are very dangerous.
Keep children away from the machine.
Use a pusher when planing narrow workpieces. Replace a damaged pusher immediately with a new
one.
Read the instructions for adjusting the brakes on the main motor.
Make sure that the periodic maintenance is executed in time.
Read the instructions for cleaning the machine. Clean only with the machine turned off.
Test the emergency stops and safety switches every week.
Periodically test the brake of the main motor. It should stop within 10 seconds.
Read the noise emission in this manual and always wear ear protection!
SD410 - S410 V0114
Deutsch English Français Nederlands
41