fantastic furniture HAVANA Manual page 5

Step 1
You will need
8 x Cam Bolts Phillips head
(H3) screwdriver
H3
H3
Insert 8 x Cam Bolts (H3) into the hole of Legs (P7, P8, P9, P10) as shown.
Step 2
You will need
3 x Small 2 x Cam Nuts
Dowels (H2) (H4)
Flat head
screwdriver
Insert 3 x Small Dowels (H2) into the hole of LF Leg (P7) as shown.
Insert 2 x Cam Nuts (H4) into the holes of Rail (P4) and Side Panel (P2).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rail (P4) and Side Panel (P2) to LF Leg (P7), then tighten the cam nut.
www.fantasticfurniture.com.au
H3
H3
(P7)
H4
H4
H2
H2
H3 H3
H3
(P9)
(P4)
(P2)
H2
(P7)
H3
(P8)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
PAGE 5
(P10)