fantastic furniture HAVANA Manual page 13

Step 18
You will need
4 x Small Cam Phillips head
Bolts (H10)
screwdriver
Screw 4 x Small Cam Bolts (H10) into Drawer Front (P12) with a Phillips head screwdriver.
Step 19
You will need
Flat head
4 x Small Cam
screwdriver
Nuts (H11)
Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P14, P15).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Align the holes together, secure Drawer Sides (P14, P15) into place and
tighten the cam nuts using a Flat head screwdriver.
Step 20
Make sure the grain
on drawer bottom is horizontal
before sliding into groove.
Slide Drawer Base (P16) in through the grooves
on Drawer Sides (P14, P15).
www.fantasticfurniture.com.au
H10
H10
(P12)
(P14)
H11
H11
(P12)
(P14)
H10
H10
(P15)
H11
H11
(P16)
(P15)
PAGE 13