STIEBEL ELTRON DHM 3 Installation Manual page 22

OPERATION
Preparations
3. Preparations
f Flush the water line thoroughly. f
Water installation
A safety valve is not required.
Taps
f Use suitable taps (see chapter "Appliance description / f
Accessories").
Note
Fitting the special aerator supplied provides an optimum
water jet.
4. Installation
4.1 Installation site
Install the appliance in a room free from the risk of frost and near
the draw-off tap.
Ensure that the lateral fixing screws for the cover are always
accessible.
The appliance is only suitable for undersink installation (water
connections at the top).
22 | DHM
DANGER Electrocution
Protection rating IP25 is only ensured if the appliance
back panel is fitted.
f Always fit the appliance back panel. f
4.2 Installation options
Undersink installation, pressure-tested, with pressure-tested
tap
www.stiebel-eltron.com