Table of Contents
Advertisement
5 You can set the SNMPc to
automatically locate your ZyXEL
switch(es). Specify the IP address,
subnet mask and community (or
password) of a device as the
starting point. Make sure the IP
address and subnet mask of this
device and your ZyXEL switch are in
the same range.
Select Start with Discovery Off to
manually add a ZyXEL switch after
initial setup.
6 Continue through the wizard a
screen appears to confirm a
successful installation of SNMPc
7.0. Click OK
7 If you need to install/upgrade
PostgreSQL, you see the screen as
shown here. Click Next to continue.
Otherwise, you see the screen as
shown in
Step
8 Specify where you want to install
PostgreSQL. Accept the default file
directory or click Browse to specify
a new location.
Follow the directions in the next
screens until you enter the
Installation Options screen of
PostgreSQL installation.
NetAtlas Workgroup Quick Start Guide
15.
4
Advertisement
Table of Contents
