Table of Contents
Advertisement
7.1 Database Synchronization
If you upgrade EMS from a previous
version, the Database
Synchronization screen displays
when you try to access the EMS.
You can use this screen to back up
the database from a previous EMS
version using the new database
format.
1 If you want to import the
database from a previous EMS version into SNMPc, select Yes.
Select No if you have created objects in SNMPc for your ZyXEL
devices and you want to have the EMS automatically obtain device
information from SNMPc.
2 In the Backup Directory field, click Browse to specify a location to
back up the database from a previous EMS version using the new
database format.
3 In the Backup Name field, enter a descriptive name for the file.
4 Click OK to continue.
Note: Database backup using the new database format allows you
to restore data from a previous EMS version. You cannot
restore information from a backup database with the old
database format.
Troubleshooting
1 EMS, SNMPc and/or PostgreSQL will not install properly
• Make sure that the computer on which you are installing EMS
meets the minimum hardware and software requirements. Refer
to
Section 2 on page
• Before installing PostgreSQL, make sure your computer is using
the NTFS file system. To check your computer's file system,
right-click on a drive in Windows Explorer and click Properties.
• Shut down any running services or applications which may affect
the installation.
NetAtlas Workgroup Quick Start Guide
2.
10
Advertisement
Table of Contents
