Configuring Snmp; Table 92 Snmp Switch Traps - ZyXEL Communications GS-3012F/3012 User Manual

Table 92 SNMP Switch Traps

OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm

29.3.4 Configuring SNMP

Click Management > Access Control > SNMP to view the screen as shown. Use this screen
to configure your SNMP settings.
GS-3012/GS-3012F User's Guide
OBJECT ID
1.3.6.1.2.1.17.0.1
GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.32.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.32.2.1
GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.107.7
0.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.107.7
0.1
1.3.6.1.2.1.17.0.2
GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.32.2.2
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.32.2.2
GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.107.7
0.2
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.107.7
0.2
GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.1
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.1
GS-3012F:
1.3.6.1.4.1.890.1.5.8.11.25.2.2
GS-3012:
1.3.6.1.4.1.890.1.5.8.10.25.2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
Chapter 29 Access Control
DESCRIPTION
This trap is sent when the STP root
switch changes.
This trap is sent when the MRSTP
root switch changes.
This trap is sent when the MSTP root
switch changes.
This trap is sent when the STP
topology changes.
This trap is sent when the MRSTP
topology changes.
This trap is sent when the MSTP root
switch changes.
This trap is sent when more than
99% of the MAC table is used.
This trap is sent when less than 95%
of the MAC table is used.
This trap is sent when a variable
goes over the RMON "rising"
threshold.
This trap is sent when the variable
falls below the RMON "falling"
threshold.
239