Initial Setup Example; Overview; Creating A Vlan; Figure 24 Initial Setup Network Example: Vlan - ZyXEL Communications GS-3012F/3012 User Manual

C
H A P T E R
This chapter shows how to set up the Switch for an example network.

5.1 Overview

The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address

5.1.1 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.

Figure 24 Initial Setup Network Example: VLAN

GS-3012/GS-3012F User's Guide

Initial Setup Example

5
59