C
H A P T E R
This chapter discusses MAC address port filtering.
10.1 Configure a Filtering Rule
Filtering means sifting traffic going through the Switch based on the source and/or destination
MAC addresses and VLAN group (ID).
Click Advanced Application > Filtering in the navigation panel to display the screen as
shown next.
Figure 45 Advanced Application > Filtering
The following table describes the related labels in this screen.
Table 21 Advanced Application > FIltering
LABEL
Active
Name
GS-3012/GS-3012F User's Guide
DESCRIPTION
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification only.
10
Filtering
97